The site will be out of service again for further upgrades regarding security fixes. Work will be carried out between 4.30am and 5.30am tomorrow morning. We apologise for the inconvenience.
Search the Community
Showing results for tags 'Power Supply'.
Found 10 results
-
In very good condition with no signs of component burn or leaking capacitors. Complete with LED switch & original mains lead. Only two years use from 1988-90 when it was removed from my LP12 which was fitted with a Lingo power supply. Connected up at my dealers (06/04/19) and confirmed fully working. If you have any questions or need more pictures please ask. £125 or nearest offer. Cash on collection (West Midlands, UK) or posting fully insured at additional cost
-
Hi I bought this precision linear PSU from RS components in Sept 2017. I have used it to power my modest audio computer at home, it gets used about once a week for a few hours. It did make the music sound better than my old analogue PL154 PSU. My reason for selling this PSU is because I'm building another computer as my current one is nearly six years old. My plan is to build a small server which needs a slightly more powerful PSU. Any questions feel free to pm me. Price new £330 inc VAT, for sale at £260. Item is in South Northamptonshire. Link to manufacturers website; https://www.aimtti.com/product-category/dc-power-supplies/aim-plseries Extract from the spec sheet and the reason I bought it; Output Performance Ripple & Noise *: Normal mode voltage: <0·4mV rms and 2mV p-p Normal mode current: <0·2mArms; <40uA on 500mA range. Common mode current: <5uA rms Load Regulation: Voltage - <0·01% + 2mV. Current - typically 0·01% + 500µA. Voltage specification applies for any load change, measured at the output terminals. When using remote sense add 0.5mV per 0.1V drop in the +ve output lead (max. sense lead resistance 0.5 W). Line Regulation: Voltage <0·01% + 2mV for 10% line change. Current <0·01% + 250µA. for 10% line change. Transient Response: <50µs to within 50mV of setting for a 90% load change. -
Wanted : Choke Regulated Power Supply (CRPS) for Musical Fidelity P180 Power Amp. I only need the CRPS, but appreciate I may have to buy the P180 too to get one :^]
-
RRP: £550 SOtM have officially launched their brand-new power supply, the sPS-500. It joins their latest components, the sMS-200Ultra Mini Network Player and tX-USBUltra USB Hub and Regenerator, completing the brand's "ultra trio". With special noise removing technology, the sPS-500 is a fan-less power supply specifically designed for high-end audio systems. It can handle a wide range of AC power inputs, with selectable output voltages of 7Vdc, 9Vdc, 12Vdc and 19Vdc. Further flexibility is available through the unit’s 50W output. The component’s design is similar to the sMS-200Ultra and tX-USBUltra, making them a stunning trio. Several other SOtM components are compatible with the device, including the sMS-1000SQ, sDP-1000EX, and sMS-200. The sPS-500 can also be used with any audio components that fit the power specifications. SOtM’s sPS-500 Power Supply is currently available to order in the UK from Elite Audio and retails at £550. A bundle pack with an AC power cable will be available soon. Key Features 7Vdc, 9Vdc, 12Vdc, 19Vdc selectable output voltage Eliminate noise generated by powered devices 50W output power for NAS, fan-less audio PC and others Support worldwide AC input voltage Output short, over temperature protection Specification User interface DC output on/off switch Operating indicator LED x1 AC power input on/off switch(Rear panel) AC power input Voltage : 100Vac ~240Vac Frequency : 50Hz / 60Hz Current : 1.6A DC power output Voltage : 7Vdc, 9Vdc, 12Vdc, 19Vdc selectable Voltage tolerance: ±10% Current limit: 5A@ 7Vdc, 9Vdc, 12Vdc 3.3A@ 19Vdc Current tolerance: ±10% Maximum output power : 55W@120Vac < 50W@110Vac 45W@100Vac Protection Output short Over temperature Operating environment Operating temperature : +10 ~ +30℃ Storage temperature : 0 ~ +40℃ Operating & storage humidity : 10% ~ 90% Dimension 106 x 48 x 230(mm) Weight 2kg > Elite Audio are the official UK distributor for SOtM. We offer an excellent 30-day, no risk trial on selected products allowing you to try out audio components at home with your own system. A generous part exchange is also available allowing you to upgrade for less. To find out how much your old hi-fi components are worth, take our part exchange challenge now. Alternatively, you can contact Elite Audio via email: info@eliteaudiouk.com or telephone: 01334 570 666 for more information. -
The cleverly named 1NRG (One Energy) is Densen’s latest external power supply unit. The component offers a significant upgrade to hi-fi systems, with a dynamic musical output. Densen have been developing and exclusively using their own power supply capacitors for several years. The 1NRG has been designed specifically for the circuits they are being used in, instead of relying on standard capacitors. Their power supplies have always contained several separate supplies, focusing on clean power to all stages of their products. The transformers are custom-made and mounted to minimise jitter on the delicate audio signals on the PCB board. Current Densen component owners will be able to upgrade their units with the 1NRG External Power Supply. At present, the following models can be upgraded; B-110, B-110+, B-110XS, B-120, B-130, B-130+, B-130XS, B-150, B-150+, B-150XS, B-175, B-175+, B-175XS, B-250, B-250+, B-250XS, B-250CAST, B-410XS, B-420XS, B-440XS and B-800MK 1, 2 and 3. Internally, the power supply unit uses Vishay metal film resistors, ultrafast precise rectifying diodes that provide no less than 200.000uF, a vibration damped custom-made transformer and two separate windings. Densen’s 1NRG External Power Supply is available in the UK from Elite Audio. Available in the brand’s signature Black or Albino (silver) finish, it retails at £1,390. Elite Audio are the official UK distributor for Densen. We offer an excellent 30-day, no risk trial on selected products allowing you to try out audio components at home with your own system. A generous part exchange is also available allowing you to upgrade for less. To find out how much your old hi-fi components are worth, take our part exchange challenge now. Alternatively, you can contact Elite Audio via email: info@eliteaudiouk.com or telephone: 020 3397 1119 for more information.
-
Barely used Loricraft PSU401 in fantastic condition, which I bought from the original owner KevinF from this parish. He used it for about 13 hours in a study(!) system, I used it for about the same timespan on account of already having a power regenerator. Although this Loricraft PSU is better, it makes no sense to run two separate PSUs. This unit was built by the estimable Nigel Pearson at Loricraft. The steady 230V output is perfect for getting your 301 or 401 to run at a constant speed which cleans up the sound remarkably. http://www.tnt-audio.com/sorgenti/loricraft_e.html It has an IEC input socket, and a Schuko output socket. It comes supplied with a long power cord with a Schuko plug at one end and an IEC plug at the other. I have an IEC socket on the back of my Garrard plinth so I just plug it straight in. It will, of course, work just as well for any other turntable whose speed stability is voltage dependent. On a quartz locked TT I would imagine the benefits would be less dramatic, however Kevin tried it on a modern TT (an Avid IIRC) and found it also brought improvements. Unless it sells beforehand, I will bring this to the Scalford bring and buy. I also drop off en route M25/M40/M1 if that helps. Price is £450 (original retail 1200)
-
12Volt, 5Amp Reference Level DC Voltage Power Supply with CHC-REG linear regulator board and 5 amp booster module. Uses high quality components throughout, including 'Nichicon Gold Tune' capacitors. I have sold my Innuos Zen Vortexbox, so now no longer have a use for the this high quality linear power supply. Supplied with mains cable and 12v output cable. This power supply is ideal for upgrading Innuos, Naim or other servers that require a high current output. New cost £650. Excellent condition, apart from the tiny scratch on the top rear edge just above the power inlet (see photo) http://www.custom-hifi-cables.co.uk/home/power-supplies/dc3-power-supply http://www.innuos.com/en/catalog/go/innuos-wave-ultimate £325 + Postage Sold for £340 + Postage on Ebay Also listed on Ebay
-
Naim NAP 300 and Power Supply - £2999, RRP - £7515 **SOLD** ** Shipping available from 1 November 2016** 1 owner from new, in excellent condition. PS has a slight blemish on the top of the front right panel. Original boxes and packing. Serial numbers are 223022 (NAP 300) and 223080 (PS) Elite Audio are part of Audio Emotion, so buy with confidence. Please call us on 0203 397 1119, PM or email us at info@eliteaudiouk.com for more information.
-
Naim Hicap DR power supply in great condition. £750 + postage or collect - Buckinghamshire. 07920 209207
-
Hicap DR sn329--- Excellent condition, sounds great! With snaic. £725 + postage. 07920 209207.
