Okay Keith has very kindly let me loan a Behringer DCX2496LE to use which is great but I am clueless on how this is set up and used . So anyone who has used this can I ask for help .
What I want to do is set the Behringer to accept an XLR Digital input and then set Crossover points to Six XLR...
MiniDSP UMIK-1 USB Measurement Microphone.
Excellent condition and complete with the original carry case, wind deflector, tripod stand, USB cable and serial number needed for the unique calibration file. The 0deg & 90deg calibration files can still be downloaded directly from the MiniDSP...
Hi all.
I currently use an Arcam SR250 as a one-box solution for both 2 channel listening and HT duties *2 channel plus 2 subs*.
Although the Arcam is a fantastic unit, I am considering selling and going the separates route.
My speakers are Spendor A7's and feel they would benefit from...
Well, despite reading comments on here about the benefits of in-room EQ, room measurements, etc. it has taken until now for me to shell out on the Minidsp Umik-1 digital microphone, necessary for making the required measurements.
For many months, I had already been using a Minidsp 4x2HD...
I have thread in the DIY section on buying a second hand pair of 80's Monitor Audio 11 speakers (choice was made for Two way , Sealed Baffle ,cheapness) which I have disconnected the passive crossover and then created an active digital crossover using the Minidsp which slots in between my Pre...
Hi purchased a virtually new unit from e-bay and everything worked except the DSP Software to control the unit . I loaded this in the sequesnce that the manual instructs but it will not connect with the Minidsp unit when it connects. Instead it tell me I have to load some additional software...
Right this is the start of what might end up to be a very long thread . Apologies in advance to thise that will lose patience but due to my inexperience in trying anything like this there are many stupid questions I will need to ask .
Day One
Stripping of the Monitor Audio units down to...
Apologies in advance for the wall of text. There's a fairly simple question you can skip to at the end but the rest is included because it's part of a wider plan with an imperfect solution and I'm open to ideas if anyone wants to really get into it, or just hear about the project we're starting...
After considering a purchase of a Minidsp unit for a while, I recently bought a Minidsp 2x4HD unit from Luke (insider9) of this parish. It was purchased mainly to act as an active crossover to my Quad ESL63 and Gradient SW63 subwoofer combo. Gradient supply an active crossover with the subs and...