diviy

Wammer
  • Content Count

    46
  • Joined

  • Last visited

Community Reputation

0 Neutral

About diviy

  • Rank
    Wammer

Personal Info

  • Location
    swansea

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. diviy

    Interconnect build advice

    Cheers all in the end I had a set made for me with that cable it cost me a fiver extra inc postage than if I was going to build them myself . The end result is they are way better than I thought they would be and now considering changing all my cables to the same as I am so impressed with them just need to save up some cash
  2. After a expensive week getting mrs car and camper sorted in the garage I`m skint but need some interconnects after doing a lot of reading I am going for these https://www.ebay.co.uk/itm/Van-Damme-Twin-Audio-Interconnect-Cable-Total-Definition-Directional-HIFI-1-150m/371683487712?epid=1739721347&hash=item568a0fefe0:m:mrF9Bn7rOgMWFzQX7Wl6CWw From a building poing of view all I need to do is solder the centre the core to middle pin and the outer braid to the outer part of the plug ? I know there is no fancy drain wire etc but I`m hoping these will do untill I can save some cash for better cable`s can anyone see any pitfulls in the way I am going to build them . Many thanks Gerry
  3. I have had a set a monoblock amps built running kt88 valves. So far I have about 25 hours on it speaking to someone today and he said I need to get at least 200 hours to run it in . I have seen run in tracks you can download for free and been suggested to use the pink noise version. Any pros and cons on the advice I have been given regards Gerry
  4. diviy

    Power supply build

    Thanks for all the advice going to leave as it is . cheers Gerry
  5. diviy

    Power supply build

    This is what I have at the moment even Dave at Timestep said its way outdated now hense the reason of upgrading it ! but not in the position of spending anything between £200.00 to £700.00 for a ready made supply Regards Gerry
  6. diviy

    Power supply build

    Ref the electric shock it was down to a sparky who added my spur not wiring the earth correct !!!! I understand the building process all I want is recomendations of the best components to build it I recased the time step and added a iec switch,led and a on off switch . once I build it it will be fully checked by someone I know. I am just after guidance redarding the parts to use everyone has to start somewhere I have messed about with some electrical projects but allways get them check before use . ps I was medically retiered in 2010 after breaking ny back in three places so I spend a massice amount of time stuck in the house due to being on benifits I am not allowed to do any day or night school classes
  7. diviy

    Power supply build

    Cheers Radioham is the picture of the reg (do you have a link for it ) what you would recommend ? I am going to get a good transformer . The timestep I have is the first timestep that was made and I know they have come a long way since then.
  8. diviy

    Power supply build

    Looking for advice on building a new power supply for my sl1210. I have been told a linear power supply would be the best to build I understand the basics of how they work but I would like advice on what toroidal transformer to get and would what be the best regulator to use from this site https://www.audiophonics.fr/en/linear-regulated-psu-c-6305.html Or if anyone know a better place to purchase the parts needed I have a original timestep power supply so want to now upgrade . safety wise once it is built it will be checked by someone I know . Many Gerry
  9. I am intrested in the tuner if you willing to post if its ok who would you like a donation to ?
  10. The mk1 cleans in one direction only 2 buttons the mk2 has a reverse option .3 buttons
  11. diviy

    valve preamp advice

    .http://www.ebay.co.uk/itm/282183028724?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
  12. BTW I may have a valve pre going for around £200. Let me know if you are interested and I'll se if the guy trying it out wants it or not

  13. Looking to get a valve preamp any opinions on this one or any links to something else on a very limited budget it is going to connect to two Arcam alpha 8p power amps http://www.ebay.co.uk/itm/Douk-Audio-6P6P-6J8P-Valve-Tube-Amplifier-HiFi-Stereo-Class-A-Single-ended-Amp/281827738296?_trksid=p2047675.c100009.m1982&_trkparms=aid%3D888007%26algo%3DDISC.MBE%26ao%3D1%26asc%3D39060%26meid%3Dc244592cca5a4d258ef06c216f26fd67%26pid%3D100009%26rk%3D1%26rkt%3D1%26sd%3D282183028724
  14. Sorry for the hi-jack but does anyone have any link`s to Amp-king work
  15. looking for a tweeter for a celestion ditton 15xr or a pair of alternative make tweeters cheap as possible please as just had to have mrs turbo done on her beetle plus my wagon`s head gasket gone not a good week Cheers Gerry